Leave Your Message

Mini Water Pump for Solar Water Heaters

A mini water pump for solar water heaters is a low-voltage DC circulator that transfers heated fluid from rooftop collectors to storage tanks. It maintains flow when the tank cannot be elevated above the collector array. The global solar water pump systems market is estimated at USD 2.68 billion in 2026, growing from USD 2.49 billion in 2025.

    How Solar Electric Water Pump Systems Operate

    A solar electric water pump operates on a closed-loop principle. Fluid absorbs heat in the collector array and transfers it to a storage tank. The CWP020G/F model operates on 12V or 24V DC with a rated power of 17W or 18W (1±10%). It delivers a maximum flow of 10.5 or 9.5±1 L/min and a maximum head of 6 or 5.5±0.5 m. The U.S. Department of Energy identifies variable-speed operation as the preferred method when flow must track process demand.

    Specification

    A solar powered water pump must match the system's hydraulic and environmental requirements. The CWP020G/F operates in ambient temperatures from -25°C to 55°C and handles media temperatures from -15°C to 100°C, suitable for pure water or antifreeze.


    For larger installations, a 48V DC water pump achieves higher head pressure for multi-story systems.

    mini-dc-submersible-pump

    Compliance for Solar Energy Water Pump Systems

    A solar energy water pump in potable water contact must comply with NSF/ANSI 61 for wetted materials and NSF/ANSI 372 for lead content. The IEA Solar Heating and Cooling Programme documents global solar thermal capacity reaching 505 GWth in 2025. With a submersible IP68 rating and Class F (155°C) insulation, the pump ensures reliable operation under demanding conditions.


    For related options, refer to the 12V DC water pump series and the brushless DC pump catalog. Additional specifications are available on the solar water heater pump resource page.

    small centrifugal water pump

    Specification 2 Water Pump For Hot Water Heater

    MODEL:CWP020G/F

     

     

    4

    AMBIENT TEMP

    -25~55℃

    HUMIDITY

    SUBMERSIBLE

    MEDIUM

    PURE WATER/ANTIFREEZE

    MEDIUM TEMP

    -15~100℃

    WATERPROOF

    IP68

    CONSTANT/CONTINUOUS PRESSURE

    1.8MPa/0.5MPa

    SPECIFICATION

    FEATURE

    RATED VOLTAGE

    12V,24V DC

    COLOR

    BLACK

    RATED CURRENT

    1.42, 0.75(1±10%)A

    WEIGHT

    216 g

    RATED POWER

    17W, 18 (1±10%) W

    NOISE

    ≦ 40dB@1m

    MAX FLOW

    10.5,9.5±1 L/min

    LIFETIME

    ≧5000H

     

    MAX HEAD

    6,5.5±0.5 m

    INSULATION

    F(155℃)

    Specification 2 Water Pump For Hot Water Tank

    FAQ

    What is the difference between a solar water heater pump and a standard circulation pump?
    A solar water heater pump operates on DC power from PV panels or batteries. A standard circulation pump requires AC mains power.

    Can a mini water pump run directly from a solar panel?
    Yes. Brushless DC pumps with soft-start circuitry can connect directly to PV panels without a battery or inverter.

    How is the flow rate for a solar water heater pump calculated?
    Required flow depends on collector area and desired delta-T. The CWP020G/F delivers up to 10.5 L/min.

    Does a solar electric water pump need NSF 61 certification?
    NSF/ANSI 61 applies to any pump component contacting potable water. Solar water heating loops in direct contact require certified wetted materials.

    What causes a solar powered water pump to lose prime?
    Air ingress through degraded suction fittings, low collector fluid level, or pump installation above the fluid line. Dry-running protection circuits prevent damage.

    Leave Your Message