Leave Your Message

EV Charging Station Liquid Cooling Pump for EV

An EV Charging Station Liquid Cooling Pump for EV is a thermal management component that circulates low-conductivity coolant through DC fast charger power modules, preventing semiconductor thermal throttling during high-load operation. As a specialized Small Water Pump engineered for high-voltage EVSE environments, it maintains continuous operation at ambient temperatures from -40°C to 70°C.

    On Demand Recirculation Pump Installation Guidelines

    According to the IEA Global EV Outlook 2025, global EV sales exceeded 17 million units in 2024, driving fast charging capacity to grow tenfold by 2030. The liquid-cooled charging station market is projected to reach $18.4 billion by 2035 at a 17% CAGR.
    The brushless motor architecture of a Dc Pu​mp Small​  eliminates mechanical brush wear, enabling continuous duty cycles. It circulates a 50/50 ethylene glycol-water mixture through microchannels in silicon carbide  inverters.

    Computer Water Pump

    Performance Specifications of Instant Hot Water Pump

    An Instant Hot Water Pump must operate reliably under high-temperature cycling conditions. Brushless DC motor technology enables precise speed control while reducing standby energy consumption by up to 85% compared to conventional shaded-pole designs source.

    Specification

      MODEL:EWP040BF

    图片1

    AMBIENT TEMP

    -40~70℃

    HUMIDITY

    Below 90% RH

    MEDIUM

    PURE WATER/ANTIFREEZE

    MEDIUM TEMP

    -40~100℃

    WATERPROOF

    IP68

    CONSTANT/CONTINUOUS PRESSURE

    1.5MPa/0.5MPa

    SPECIFICATION

    FEATURE

    RATED VOLTAGE

    12V DC

    COLOR

    black

    RATED CURRENT

    4.2,4.3(1±10%)A

    WEIGHT

    276 g

    RATED POWER

    50,52(1±10%)W

    NOISE

    ≦ 40dB@1m

    MAX FLOW

      38(1±10%)L/min

    LIFETIME

    ≧ 10000 H

    MAX HEAD

    9,12±1 m

    INSULATION

    H (155℃)

    cpu-water-pump

    Tankless Water Recirculation Pump in Point-of-Use Systems

    The brushless motor architecture of a Small Dc Pump extends operational lifetime significantly compared to brushed alternatives, ensuring high reliability for outdoor EVSE installations.

    Pump Type

    Estimated Lifetime

    Brushless DC Pump

    ≥10,000 hours

    Traditional Brushed Pump

    ≤5,000 hours

    Frequently Asked Questions

    Q1: What is the primary function of this pump?

    It circulates coolant through power electronics in DC fast chargers to prevent semiconductor thermal throttling.

    Q2: What flow rate is required for 350kW chargers?

    A minimum flow rate of 38 L/min is required to maintain junction temperatures below safe thresholds.

    Q3: Can antifreeze mixtures be used?

    Yes, it supports 50/50 ethylene glycol-water mixtures without degrading the impeller.

    Q4: What causes premature failure?

    Cavitation from low inlet pressure, dielectric contamination, or thermal stress exceeding 155°C limits.

    Q5: How often should the pump be replaced?

    Replacement intervals typically range from 2.5 to 5 years depending on duty cycle and ambient conditions.

    faq-small-water-pump-for-proje

    Leave Your Message